If you wish to contribute or participate in the discussions about articles you are invited to join SKYbrary as a registered user



From SKYbrary Wiki

Article Information
Category: Theory of Flight Theory of Flight
Content source: SKYbrary About SKYbrary

Aerofoil or Airfoil


A body shaped to produce an aerodynamic reaction (lift) perpendicular to its direction of motion, for a small resistance (drag) force in that plane.


typical aerofoil cross-section for low-speed flight
Figure 1 illustrates a typical aerofoil cross-section for low-speed flight.

The airflow over the wing increases its speed causing a reduction in pressure; this generates a force (lift) perpendicular to the chord of the aerofoil. The airflow below the wing moves much more slowly generating greater pressure and less or negative lift.

All aerofoil surfaces generate drag.

terms used in describing an aerofoil surface.
Figure 2 illustrates the terms used in describing an aerofoil surface.

The distance between a wing root and wing tip the length of the wing. Wing span is the distance from one wing tip to the other wing tip. The ratio of wing length to chord is called the aspect ratio.

The amount of lift and drag generated by an aerofoil depends on its shape (camber), surface area, angle of attack, air density and speed through the air.

The objective of aerofoil design is to achieve the best compromise between lift and drag for the flight envelope in which it is intended to operate.

Aerofoil surfaces includes wings, tailplanes, fins, winglets, propeller blades and helicopter rotor blades. Control surfaces (e.g. ailerons, elevators and rudders) are shaped to contribute to the overall aerofoil section of the wing or empennage.

Related Articles