From SKYbrary Wiki
ESARR 3 - Use of Safety Management System by ATM Service Providers
ESARR 3 mandates the implementation and use of Safety Management Systems (SMS) by providers of ATM services.
The overall objective of this requirement is to ensure that all safety issues and risks within the provision of the ATM service have been addressed in a satisfactory manner, and to a satisfactory conclusion. The achievement of this objective is ensured through the implementation of the following requirements:
- A formalized, explicit and proactive approach is applied to systematic safety management.
- Individual safety responsibilities are defined for all staff involved in safety related tasks and management responsibilities for the safety performance of their organisation.
- Safety of ATM is afforded the highest priority over commercial, operational, environmental and social pressures.
- ATM contribution to the risk of an aircraft accident is reduced as far as reasonably practical.
- Further requirements concerning safety achievement are defined, including risk assessment and mitigation; safety assurance and safety promotion.
The main components of an ATM service provider SMS meeting ESARR 3 requirements are described in the following table:
Transposition into Community Law
ESARR 3 has been transposed into European Community law by Regulation (EC) No 2096/2005 of 20 December 2005 laying down common requirements for the provision of air navigation services, which was repealed by Commission Implementing Regulation (EU) No 1035/2011 of 17 October 2011 laying down common requirements for the provision of air navigation services and amending Regulations (EC) No 482/2008 and (EU) No 691/2010
For more detailed informaion go to article: Transposition of ESARRs into Community Law
- ESARR3 - Use of Safety Management Systems by ATM Service Providers;
- ESARR 3 Guidance to ATM Safety Regulators - Explanatory Material on ESARR 3 Requirements;
- Safety Regulatory Aspects of the ESARR 3 Implementation in Small Organisations;
- ESARR 3 and Related Safety Oversight;
- Mapping between ISO 9001:2000 and ESARR 3;
- Mapping between ESARR 3 and ICAO provisions on safety management systems at aerodromes;
- Acceptable Means of Compliance in Relation to ESARR 3;
- Consistency between ESARR 3 and ICAO SARPs;
- Assessement of EATMP Safety Policy as a Means of Compliance with ESARR 3