If you wish to contribute or participate in the discussions about articles you are invited to join SKYbrary as a registered user

 Actions

Difference between revisions of "Flaps"

From SKYbrary Wiki

Line 14: Line 14:
  
 
There are many different flap designs and configurations in use. Large aircraft sometimes incorporate more than one type utilising different flap designs on the inboard and outboard sections of the wing. The following are descriptions of some of the more common flap designs.
 
There are many different flap designs and configurations in use. Large aircraft sometimes incorporate more than one type utilising different flap designs on the inboard and outboard sections of the wing. The following are descriptions of some of the more common flap designs.
 +
 +
[[File:Flap types.png|200px|thumb|left|Flap Types]]
  
 
==Related Articles==
 
==Related Articles==

Revision as of 15:58, 20 August 2013

Article Information
Category: General General
Content source: SKYbrary About SKYbrary
Content control: EUROCONTROL EUROCONTROL
Ambox content.png
The present article is under construction.
Reader enquiries are welcome, contact the editor: editor@skybrary.aero.
Ambox content.png


Description

Flaps are a high lift device consisting of a hinged panel or panels mounted on the trailing edge of the wing. When extended, they increase the camber and, in most cases, the surface area of the wing resulting in an increase of both lift and drag and a reduction of the stall speed. These factors result in an improvement in takeoff and landing performance.

There are many different flap designs and configurations in use. Large aircraft sometimes incorporate more than one type utilising different flap designs on the inboard and outboard sections of the wing. The following are descriptions of some of the more common flap designs.

Flap Types

Related Articles