Airworthiness

Description

Airworthiness may be defined as the fitness of an aircraft for flight in all the environments and circumstances for which it has been designed and to which it may therefore be exposed. An Airworthy aeroplane is one which is fit to fly.

For further information read the entry article about Airworthiness.

Showing below 64 results in range #1 to #64.

A

Accident and Serious Incident Reports: AW
Aerofoil
Ageing Aircraft - Electrical Wiring
Ageing Aircraft - Structural Failure
Aircraft Certification for Bird Strike Risk
Aircraft Condition Monitoring System (ACMS)
Aircraft Electrical Systems
Aircraft Fuel Systems
Aircraft Maintenance
Airworthiness
Airworthiness - The System
Airworthiness Directive
Approved Maintenance Organization (AMO)
ATA Classification

B

Bird Strikes in UAS Operations

C

Captain's Aircraft Acceptance
Carbon fibre reinforced plastics (CFRP)
Certificate of Airworthiness
Certificate of Release to Service (CRS)
Certification of Aircraft, Design and Production
Classifying Depressurization Events in Service Difficulty Reports with Machine Learning
Composite Airframe Ground Damage Risk
Contained Engine Failure
Continuing Airworthiness
Continuing Airworthiness Management Organisation (CAMO)
Crew Training for Functional Check Flights
Cross-Connected Systems

D

Damage Tolerance
Defect Assessment
Design Philosophy
Designated Airworthiness Representative (DAR)

F

Fault Investigation Manual (FIM)
Flaps
Functional Check Flight (FCF)

H

Health and Usage Monitoring System (HUMS)
Helicopter Emergency Floatation Systems (EFS)
Hydraulic Systems

I

Icing Certification
International Federation of Airworthiness (IFA)

M

Magnetic Chip Detector (MCD)
Maintenance Check Flight (MCF)
Maintenance Error
Maintenance Error Management System
Maintenance Programme
Maintenance Steering Group-3 (MSG-3)
Maintenance Workload
Mean Time Between Unscheduled Removal (MTBUR)
Minimum Equipment List (MEL)
Minor Repair Responses to Composite Airframe Damage

N

Nimrod Review
No Technical Objection (NTO)
Non Destructive Testing of Composite Materials in Aviation
NTSB Safety Recommendations Report Arising from the Boeing 737 MAX-8 Fatal Accidents in 2018 and 2019

O

Organisation Designation Authorisation (ODA)

R

Radio Frequency Identification (RFID) in Airline Operations and Maintenance
Reliability
Runway De-icing

S

Service Bulletin (SB)
Supplementary Type Certificate (STC)

T

Type Certificate

U

Uncontained Engine Failure
Unreliable Airspeed Indications
Use of Personal Electronic Devices (PEDs) on Aircraft

V

Vibration Health Monitoring (VHM)

SKYbrary Partners:

Safety knowledge contributed by: